Forum

has anyone got this to work on intel integrated cards?

Quoted from Heart'

I can’t click anything… On nvidia inspector. Does this require NVIDIA card? Cause i got AMD Radeon HD 5500 Series Card.

The Second Variant:

1. Download RivaTuner

2. Install RivaTuner.
(Usual procedure, extracts to somewhere like your desktop. Then browse to the setup file and follow the wizard.)

3. Set up RivaTuner.
First time you run the program you will have to wait for it sort itself out.
Once this has completed you will get to the main RivaTuner screen.
http://fakkelbrigade.eu/forsaken/webfiles/2

3.1. Click the power user tab.
http://fakkelbrigade.eu/forsaken/webfiles/3

3.2. Expand the “RivaTuner NVIDIA Global” menu. Enter a value in “LODBiasRange” of 15.
http://fakkelbrigade.eu/forsaken/webfiles/4

4. Go back to the main tab. Then click on the little arrow Under “Driver Settings” next to where it says “ForceWare detected.” Click on the directX Symbol to open a new window.
http://fakkelbrigade.eu/forsaken/webfiles/5

5. In the new window, adjust the slider to where you want it. Put it on 0 to turn off any changes (Application will decide the LOD). 15 will be worst textures.
http://fakkelbrigade.eu/forsaken/webfiles/6

*It may have problems with some of versions of nvidia drivers.
The excellent ones (for me) are 197.45.

*This tutorial was posted originally by nub on a mission on his scout blog – http://tf2scout.blogspot.com/2009/07/high-lod-picmip-hack-for-tf2.html

Scroll down for a cfg which will allow it to work on tf2.

————————————————————————————————
————————————————————————————————

-ATI Cards-

1. Download Ati Tray Tools.
2. Install it.
3. Open direct3d > settings > additional > texture lod adjustment.
4. Set it to 10, it’s almost the same like 15 in nvidia.

–CFG–
Config: http://pastebin.com/CNSD2bkb (Added: 16.09.2011)

Don’t install anything please. ATI LOD level can be adjusted by a small registry tweak.

Right click your desktop
Go to AMD catalyst control Center
Open up Information
Click on Software
Look at the 2D Driver File Path

Open registry (windows key + R, enter “regedit”)
Navigate to the path from 2D Driver File Path
Right click and create a new value, “LodAdj”
Double click that value after saving and enter 15.

That’s all you have to do. Check my post on the last page to see the difference.

All other methods are outdated by years, I’ve done the above method after upgrading to windows 10.

Quoted from R4ndom

Just for future reference, those who are using this, just be aware that it adds input lag. It’s especially noticeable if you have a 144Hz low input lag monitor.

Which method does this?

R4ndom is only correct if you enabled AA_MODE_REPLAY_ALL. Other than that, this fix DOESN’T add input lag.

only if you’re using newer Nvidia cards.

LOD Bias should be set to 10.000 or 15.000

change “mat_filterlightmaps” and “mat_filtertextures” to 0 to make them blocky.
Having them at 1 makes it look blurry :)