Forum

Quoted from octochris

Updated.

I see nothing up to date faggot, your fps configs still make my tf2 look bad u scammer!

chris_dx9frames_1.024.cfg vs chris_dx9frames_1.029.cfg

+ // [2011-04-05] Major issues reported on some (NOT all) PCs when specifying mat_antialias directly. Try removing it if you have problems.
+ // As an alternative, you can try adding +mat_antialias 1 to your launch options.
+
—
– // v1.024 | 19 December 2010 | fakkelbrigade.eu/chris/configs/
+ // v1.029 | 22 May 2011 | fakkelbrigade.eu/chris/configs/
—
– // FOR FULLSCREEN: -dxlevel 90 -full -w WIDTH -h HEIGHT -console -nojoy -noipx -novid -useforcedmparms -noforcemaccel -noforcemspd
– // FOR WINDOWED MODE: -dxlevel 90 -sw -w WIDTH -h HEIGHT -console -noborder -nojoy -noipx -novid -useforcedmparms -noforcemaccel -noforcemspd
+ // FOR FULLSCREEN: -dxlevel 95 -full -w WIDTH -h HEIGHT -console -novid -useforcedmparms -noforcemaccel -noforcemspd
+ // FOR WINDOWED MODE: -dxlevel 95 -sw -w WIDTH -h HEIGHT -console -noborder -novid -useforcedmparms -noforcemaccel -noforcemspd
—
– //cl_cmdrate “67”
+ //cl_cmdrate “66”
—
– //cl_updaterate “67”
+ //cl_updaterate “66”
—
– mat_antialias “0”
+ mat_antialias “1”
—
– mat_software_aa_blur_one_pixel_lines “0”
– mat_software_aa_strength “0”
– mat_software_aa_strength_vgui “0”
– mat_software_aa_tap_offset “0”

=========
chris_highframes_1.079.cfg vs chris_highframes_1.083.cfg

+ // [2011-04-05] Major issues reported on some (NOT all) PCs when specifying mat_antialias directly. Try removing it if you have problems.
+ // As an alternative, you can try adding +mat_antialias 1 to your launch options.
+
—
– // v1.079 | 19 December 2010 | fakkelbrigade.eu/chris/configs/
+ // v1.083 | 22 May 2011 | fakkelbrigade.eu/chris/configs/
—
– // FOR FULLSCREEN: -dxlevel 81 -full -w WIDTH -h HEIGHT -console -nojoy -noipx -novid -useforcedmparms -noforcemaccel -noforcemspd
– // FOR WINDOWED MODE: -dxlevel 81 -sw -w WIDTH -h HEIGHT -console -noborder -nojoy -noipx -novid -useforcedmparms -noforcemaccel -noforcemspd
+ // FOR FULLSCREEN: -dxlevel 81 -full -w WIDTH -h HEIGHT -console -novid -useforcedmparms -noforcemaccel -noforcemspd
+ // FOR WINDOWED MODE: -dxlevel 81 -sw -w WIDTH -h HEIGHT -console -noborder -novid -useforcedmparms -noforcemaccel -noforcemspd
—
– //cl_cmdrate “67”
+ //cl_cmdrate “66”
—
– //cl_updaterate “67”
+ //cl_updaterate “66”
—
– mat_antialias “0”
+ mat_antialias “1”
—
– mat_software_aa_blur_one_pixel_lines “0”
– mat_software_aa_strength “0”
– mat_software_aa_strength_vgui “0”
– mat_software_aa_tap_offset “0”
—
– tf_particles_disable_weather “1”
+ tf_particles_disable_weather “1” // Set to 0 to enable weather effects on maps like Viaduct and Sawmill

=========
chris_highquality_1.018.cfg vs chris_highquality_1.021.cfg

+ // [2011-04-05] Major issues reported on some (NOT all) PCs when specifying mat_antialias directly. Try removing it if you have problems.
+ // As an alternative, you can try adding +mat_antialias 1 to your launch options.
+
—
– // v1.018 | 20 November 2010 | fakkelbrigade.eu/chris/configs/
+ // v1.021 | 22 May 2011 | fakkelbrigade.eu/chris/configs/
—
– // FOR FULLSCREEN: -dxlevel 98 -full -w WIDTH -h HEIGHT -console -nojoy -noipx -novid -useforcedmparms -noforcemaccel -noforcemspd
– // FOR WINDOWED MODE: -dxlevel 98 -sw -w WIDTH -h HEIGHT -console -noborder -nojoy -noipx -novid -useforcedmparms -noforcemaccel -noforcemspd
+ // FOR FULLSCREEN: -dxlevel 98 -full -w WIDTH -h HEIGHT -console -novid -useforcedmparms -noforcemaccel -noforcemspd
+ // FOR WINDOWED MODE: -dxlevel 98 -sw -w WIDTH -h HEIGHT -console -noborder -novid -useforcedmparms -noforcemaccel -noforcemspd
—
– //cl_cmdrate “67”
+ //cl_cmdrate “66”
—
– //cl_updaterate “67”
+ //cl_updaterate “66”
—
– cl_detaildist “1200”
+ cl_detaildist “2048”

=========
chris_maxframes_1.080.cfg vs chris_maxframes_1.083.cfg
+ // [2011-04-05] Major issues reported on some (NOT all) PCs when specifying mat_antialias directly. Try removing it if you have problems.
+ // As an alternative, you can try adding +mat_antialias 1 to your launch options.
+
—
– // v1.080 | 19 December 2010 | fakkelbrigade.eu/chris/configs/
+ // v1.083 | 22 May 2011 | fakkelbrigade.eu/chris/configs/
—
– // FOR FULLSCREEN: -dxlevel 81 -full -w WIDTH -h HEIGHT -console -nojoy -noipx -novid -useforcedmparms -noforcemaccel -noforcemspd
– // FOR WINDOWED MODE: -dxlevel 81 -sw -w WIDTH -h HEIGHT -console -noborder -nojoy -noipx -novid -useforcedmparms -noforcemaccel -noforcemspd
+ // FOR FULLSCREEN: -dxlevel 81 -full -w WIDTH -h HEIGHT -console -novid -useforcedmparms -noforcemaccel -noforcemspd
+ // FOR WINDOWED MODE: -dxlevel 81 -sw -w WIDTH -h HEIGHT -console -noborder -novid -useforcedmparms -noforcemaccel -noforcemspd
—
– //cl_cmdrate “67”
+ //cl_cmdrate “66”
—
– //cl_updaterate “67”
+ //cl_updaterate “66”
—
– mat_antialias “0”
+ mat_antialias “1”
—
– mat_software_aa_blur_one_pixel_lines “0”
– mat_software_aa_strength “0”
– mat_software_aa_strength_vgui “0”
– mat_software_aa_tap_offset “0”
—
– tf_particles_disable_weather “1”
+ tf_particles_disable_weather “1” // Set to 0 to enable weather effects on maps like Viaduct and Sawmill

=========
chris_maxquality_1.034.cfg vs chris_maxquality_1.037.cfg
+ // [2011-04-05] Major issues reported on some (NOT all) PCs when specifying mat_antialias directly. Try removing it if you have problems.
+ // As an alternative, you can try adding +mat_antialias 1 to your launch options.
+
—
– // v1.034 | 20 November 2010 | fakkelbrigade.eu/chris/configs/
+ // v1.037 | 22 May 2011 | fakkelbrigade.eu/chris/configs/
—
– // FOR FULLSCREEN: -dxlevel 98 -full -w WIDTH -h HEIGHT -console -nojoy -noipx -novid -useforcedmparms -noforcemaccel -noforcemspd
– // FOR WINDOWED MODE: -dxlevel 98 -sw -w WIDTH -h HEIGHT -console -noborder -nojoy -noipx -novid -useforcedmparms -noforcemaccel -noforcemspd
+ // FOR FULLSCREEN: -dxlevel 98 -full -w WIDTH -h HEIGHT -console -novid -useforcedmparms -noforcemaccel -noforcemspd
+ // FOR WINDOWED MODE: -dxlevel 98 -sw -w WIDTH -h HEIGHT -console -noborder -novid -useforcedmparms -noforcemaccel -noforcemspd
—
– //cl_cmdrate “67”
+ //cl_cmdrate “66”
—
– //cl_updaterate “67”
+ //cl_updaterate “66”

…

in 1 word: not much ;)

Quoted from compleat

I’m interested in why the 67 to 66 change in both cmdrate and updaterate cvars, and why removing the -nojoy and -noipx launch options :o
Also, why enabling antialias in the highframes and maxframes configs?
Not questioning anything, just want to know the reasoning behind…

cmdrate/updaterate were changed as Valve appears to have fixed the issues surrounding switching them to 67 in the first place.

-nojoy and -noipx don’t do anything. I removed them a long time ago (he just compared an old version)

1 does not enable antialiasing. 1 == 0 for this purpose, it’s just that I changed it to the standard value used.

Your max quality cfg crashes my latest nonsteams :(

Latest & yes.

What happens is this;
The demo loads, the first 100 ish frames play, but are laggy, sound is stuttery, then it enters a 5-second mini-soundloop while the screen hangs, and then it just crashes.

The same happens when i type “exec sdf” in console (where “sdf” is a file that doesn’t exist”). I had your config saved as fps.cfg, but if i exec fps, it crashes even if that file is empty.
Eventually managed to fix it by copying my live tf2 config over to the nonsteam (must add that with no config at all it crashes too!!), but as soon as i try to exec your maxqlty cfg it crashes again.

Not too big a deal (yet) though.

Nice move putting your configs on GitHub. Now I might actually be able to pull your code in TF2mate live, without having to update the files manually ;)

edit: or is it a private repo?

Quoted from compton

Nice move putting your configs on GitHub. Now I might actually be able to pull your code in TF2mate live, without having to update the files manually ;)

edit: or is it a private repo?

public, you can just clone from git://github.com/cdown/tf2configs.git