Forum
Troubles with mouse
Created 25th September 2009 @ 16:18
Add A Reply Pages: 1
Welcume
I has small problems with mouse. I play normally on TF2, suddenly ingame sensitivity increase. After 2 seconds it backs to standard sensitive. I can’t normal play with this sh*tty problem. I aim to the target, suddenly crosshair moves somewhere, not where I want to. I tested it on 2 mouses (Razer Deathadder and A4tech x748k) and it’s same problem on both of them. What can i do?
– I update Mouse Drivers (on both of them). Didn’t work
– I placed mouse commands on game launch options (-noforcemparms -noforcemaccel -noforcemspd). Didn’t work…
– Windows acceleration is off…
– I didn’t have any binds of sensitivity change.
This problem i has ONLY on TF2. On Windows and other games (CS:S, CS 1.6, COD4) works fine, without problems
So, wtf?
Last edited by laress,
I had the same problem some time ago.
I also had those commands to disable mouseacc in the launch options and windows acceleration was off, no “enhanched pointer precision” and so on.
But still I had the same problem.
It turned out to be mouse acceleration anyway. I had to add some commands in my autoexec .cfg file.
Try to add this :
m_customaccel “0”
m_customaccel_scale “0.00”
m_customaccel_max “0”
m_filter “0”
m_mouseaccel1 “0”
m_mouseaccel2 “0”
It helped in my case.
Edit : Beware of copy and pasting the above. Those ” marks should be citation marks.
For some reason they get transformed when I post them here.
Last edited by Iller,
Edit : Beware of copy and pasting the above. Those ” marks should be citation marks.
For some reason they get transformed when I post them here.
put code tags around them
Last edited by klu,
I think I am getting the same problem, although I am not sure if i understood yours correctly. What I am getting is some sort of skipping, as if i was playing with insanely high mouse accel.
I haven’t really figured out when exactly it starts to occur, nor do I have any idea why, however I have experimented a bit and am starting to get a hold of it.
First off: which Windows are you running? (I run Vista x64)
Here are some ideas:
– Try different usb rates (250/500/1000hz)
– Try different usb ports on your mainboard
– Use different surfaces (and/or clean them)
– Clean the lens of your mouse’s tracker (q-tips work fine)
– Try various settings in the drivers (some can override windows settings)
– Sometimes the problem disappears for me after a reboot
I found out that the most reliable setup for me and my MX518 is the following: Setpoint (DPI locked to 1600, setpoint standard in games) and usb rate at 250hz.
Hope this helps:)
Well, it works :). Thx
Add A Reply Pages: 1
content rss