Forum
QLC (HighFPS/Quality) - Hotifx for Classless Update
Created 27th May 2009 @ 12:11
Add A Reply Pages: « Previous 1 2 3 4 Next »
I love you man, my fps was shitty with all the cfgs i`ve been using, m0re`s including. thanks to this, i get my 200fps again :DDDD thaaanks, maaaaan
my pc is a joke
cl_ragdoll_forcefade “1” // def. “0” # If set to “1” then cl_ragdoll_forcefade is used
Love that line :D
…
… TF starting, so what is it?
I ment cl_ragdoll_fade_time not cl_ragdoll_forcefade ^_^ thx for Info.
and the Launchoptions which are not covered in waebis post and my manual
Enable Console: -console
No Video at Start: -novid
No Mouse Accerlation: -noforcemparms -noforcemaccel -noforcemspd
I got a question, when using this config (or other good ones) in dx9, my weapons are like, not shiny.. ( pic; [Link] )
What I want is those ’shine-lines’, as shown here. ( pic; [Link] )
Anyone know how?
My Guess
mat_fastspecular “1” // def. “” # Faster Spec but lower Quality on(1)/off(0)
mat_specular “0” // def. “1” # Specular highlight on(1)/off(0)
Thx for this very nice cfg =)
Just a question : how do remove the console informations in the top left ?
edit : I haven’t my netgraph, but i’ve netgraph “1”, i want it in the bottom right.
Thx for this very nice cfg =)
Just a question : how do remove the console informations in the top left ?
edit : I haven’t my netgraph, but i’ve netgraph “1”, i want it in the bottom right.
Look for echo-commands in the config Files and remove them then there will be no output into the console.
For the Netgraphsettings look into …/cfg/Quantums.cfg/SourceEngine_Custom.cfg and adjust the values as you like.
net_graph “0” // def. “0” # Draw the network usage graph on(1,2,3,4)/off(0)
net_graphheight “64” // def. “64” # H-Postion of the netgraph
net_graphpos “1” // def. “1” # Right/Middle/Left on Screen
i tried it and it’s ok. tho my fps drops 40-50 with this one :p
he means the developer information prolly, just change developer 0 to configs
cl_ragdoll_forcefade “1” // def. “0” # If set to “1” then cl_ragdoll_forcefade is used
Love that line :D
…
… TF starting, so what is it?
I ment cl_ragdoll_fade_time not cl_ragdoll_forcefade ^_^ thx for Info.
and the Launchoptions which are not covered in waebis post and my manual
Enable Console: -console
No Video at Start: -novid
No Mouse Accerlation: -noforcemparms -noforcemaccel -noforcemspdI got a question, when using this config (or other good ones) in dx9, my weapons are like, not shiny.. ( pic; [Link] )
What I want is those ’shine-lines’, as shown here. ( pic; [Link] )
Anyone know how?My Guess
mat_fastspecular “1” // def. “” # Faster Spec but lower Quality on(1)/off(0)
mat_specular “0” // def. “1” # Specular highlight on(1)/off(0)
It has worked with Specular on 0 before, so it’s not that..
Hey,
I use this config but it cuts my gun sounds out randomly, like it’ll play the first part of a shot on the scattergun/sniper rifle then just cut out. Was wondering what command might need changing to fix this?
Thanks.
…
It has worked with Specular on 0 before, so it’s not that..
Ok, maybe it deepends “mat_specular” and “mat_bumpmap” they can produce a white overlay texture if both are disabled when i remember correct ;)
But i´m not really sure this will be it and at the moment i have no other idea ^_^
Hey,
I use this config but it cuts my gun sounds out randomly, like it’ll play the first part of a shot on the scattergun/sniper rifle then just cut out. Was wondering what command might need changing to fix this?
Thanks.
This “Problem” is caused by the CVar “snd_mix_async”
Set it to 0 and it will be solved
Can be found in …/cfg/Quantums.cfg/SourceEngine_Multicore.cfg
————————-
snd_mix_async
————————-
Use multicore CPUs to run the most of the sound engine in parallel with the renderer. [valve] | Can reduce studdering of the game, but normaly produces some minor soundbugs
he means the developer information prolly, just change developer 0 to configs
Never know about the developer information, so thx for info :)
i tried it and it’s ok. tho my fps drops 40-50 with this one :p
So its my turn to check your config :)
I used the TF2 “timedemo” command with this demo i recorded on public
http://www.file-upload.net/download-1676830/testdemo.dem.html
[only 1 run, each]
mores autoexec.cfg
2372 frames 63.671 seconds 37.25 fps (26.84 ms/f) 2.545 fps variability
mores autoexec_high.cfg
2372 frames 54.283 seconds 43.70 fps (22.88 ms/f) 2.382 fps variability
QLC HighFPS
2372 frames 57.891 seconds 40.97 fps (24.41 ms/f) 2.394 fps variability
QLC HighQuality
2372 frames 143.383 seconds 16.54 fps (60.45 ms/f) 0.898 fps variability
Normaly +-5 fps is deepending on the run, i would say. So in my opinion where are even @ the fps. As long you dont try to compare with my HighQuality :p
I can´t say if yours has less or more studdering then mine, because i dont know how to test that. I can only say, you havent use RAM-Cvars.
But in my humble opinion mine looks a little better, but we both have a good HighFPS cfg :)
So i suggest anyone you needs a HighFPS should test which runs on his PC better and use it.
mfg Quantum
that must be amd cpu you’ve there, i was comparing my highhigh config to your highfps. didnt try to bash you down in anyway. fps is almost the same with my highfps compared to yours, and feels ok too. tho cl_interp you’ve set is a bit high imho.
Download link broken? Won’t work for me :(
Same for me :<
Download link broken? Won’t work for me :(
Same for me :<
Sry Guys Clanside (da-gaming.de) is down dont know why. But it will be back up later.
Maybe tomorrow, havent reach anyone until know, just try later :(
that must be amd cpu you’ve there, i was comparing my highhigh config to your highfps. didnt try to bash you down in anyway. fps is almost the same with my highfps compared to yours, and feels ok too. tho cl_interp you’ve set is a bit high imho.
More i haven´t understand your comment as a bash, i like that you checked out mine :)
I was just curious and tried to summarys the facts so anyone can reproduce it for there own PC and make a decision based on that ^_^.
I know that the result differ because of the hardware and yeah our rigth i got an old amd-cpu which is limiting my TF2 :/
Thx more(hud) and quantum(cfg) it’s perfect =)
Add A Reply Pages: « Previous 1 2 3 4 Next »
content rss